- Up to 64 tests can be performed on one plate
- With test impact voltage (Vbr), TIA working current (Icc), dark current (Idark), light induced current (Iop), light responsivity (Resp), measurement D+/D- voltage.
- Select the light couple mode, the choice can choose between different types of light mode (accurate), or provide mode (fast)
- Built-in 1490nm light source, light output can be adjusted
- With software screening and classification function
- Height adjustment function, can have height adjustment function according to different products
- Dimensions (W600*L650*H700 mm)
- One year warranty
-
-
- One tray can test up to 64
- Simultaneous testing of LIV and wavelength-related parameters (Yokogawa AQ6370D recommended)
- With test product focal length function (Focal Length)
- LIV tester current range 0~200mA
- Support various pin positions
- With software screening and classification function
- The average test speed is about 60s/pcs, including LIV, SMSR and Focal Length tests
- With height adjustment function, the height can be adjusted according to different products
- Dimensions (W600*L650*H700 mm)
- One year warranty
-
- A disk can test up to 64
- PD responsivity and dark current test
- Connected to external light source (adjustable optical power and wavelength) or use the system's internal light source (single wavelength)
- Built-in photocurrent detection circuit, and software correction function, the optical power correction accuracy can reach below 0.5%
- High-precision dual light and optical system functions, it can test PD products with a diameter of about 50um, and the repeated measurement accuracy can reach below 1%
- Software screening and classification function
- The average test speed is about 50s/pcs (product size and even light conditions are related)
- Optional heating plate for testing product characteristics under high temperature conditions
- Dimensions (W600*L650*H700 mm)
- One year warranty
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
